AGAMA Tensol 25ml - Softener Decals
Product no.: AG1470
Description
AGAMA Tensol 25ml - Softener Decals
Item no .: AG1470
For bubble-free application of decals, apply ADHESOL adhesion promoter to the substrate with a brush, slide on the decal and press on with a cotton swab. Use the cotton swab to gently roll out trapped air bubbles and excess liquid to the side. Then TENSOL softener (HYPERSOL on difficult substrates) is applied with a brush and allowed to dry for at least 12 hours. NEVER PRESS OR TOUCH AFTER APPLICATION, otherwise the decal will inevitably be destroyed and the lacquer will be loosened and damaged. If the decal has not completely clung to the surface after drying, repeat the process with HYPERSOL and allow it to dry again WITHOUT PRESSING AND TOUCHING.
Labeling according to Regulation (EC) 1272/2008
ATTENTION
Contains: 1-methoxy-2-propanol, ethanol
Hazard warnings:
H336 May cause drowsiness and dizziness.
Safety instructions:
P261 Avoid breathing aerosol.
P271 Use only outdoors or in a well-ventilated area.
P312 Call a poison center or doctor / physician if you feel unwell.
P403 + P233 Keep container tightly closed in a well-ventilated place.
P501 Dispose of contents / container to in accordance with local / national regulations.
Special marking:
Keep out of the reach of children!