Premium-Superglue 25g (medium viscosity) + Activator Set- Bergswerk 83005

Premium instant glue 25g (medium viscosity) + Activator Spray

This is a discontinued item because we have added new adhesives to our range. You can find them here!

The perfect all-rounder: medium-viscosity, solvent-free, high-performance cyanoacrylate adhesive for fast and permanent bonding of a wide variety of material compounds made of metal, rubber, wood, cardboard, ceramics, PMMA (acrylic glass), polystyrene rigid foam and numerous plastics with one another. The premium superglue does not contain any dangerous or harmful ingredients. Is odorless, does not bloom and remains flexible despite the high strength, so that no cracks form after setting.

The premium superglue is supplied in a practical dosing bottle with a capillary nozzle, which allows precise, extremely fine dosing of the thin-bodied adhesive. Due to its high flowability, the adhesive creeps into even the smallest crack. The hand strength is reached after 10 - 120 seconds, the final strength after 24 hours. Escaping adhesive can be removed with the cyanoacrylate adhesive remover after it has hardened.

Can be stored for at least 6 months at 5 ° C to 8 ° C

Store glue in the refrigerator if possible.

Label-free according to regulation (EG) 1272/2008

Contains: EUH202 cyanoacrylate. Danger! Bonds skin and eyelids together in seconds. IF IN EYES: Rinse cautiously with water for several minutes. Remove any existing contact lenses if possible. Continue rinsing.

- - - - -

By using the activator spray, the setting time of cyanoacrylate adhesives is considerably accelerated. The activator spray is used wherever an increased curing speed is required. Other areas of application are thick layers and absorbent substrates.

The activator spray is sprayed on from a spray distance of about 30 cm. Hand strength is achieved in 1-4 seconds, depending on the cyanoacrylate adhesive used, the gap between the parts and the room temperature. Attention: Can attack painted surfaces as well as PS and EPS rigid foams. A material test is recommended before use.

Can be stored for at least 12 months

Labeling according to Regulation (EC) 1272/2008

DANGER:

Contains: acetone.

Hazard warnings:

H222 Extremely flammable aerosol

H229 Pressurized container: may burst if heated.

H319 Causes serious eye irritation.

H336 May cause drowsiness and dizziness.

Safety instructions:

P102 Keep out of the reach of children.

P210 From heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.

P211 Do not spray on an open flame or other ignition source.

P251 Do not pierce or burn, even after use.

P261 Avoid breathing aerosol.

P271 Use only outdoors or in a well-ventilated area.

P280 Wear eye / face protection.

P410 Protect from sunlight.

P412 Do not expose to temperatures exceeding 50 ° C / 122 ° F.

P337 + P313 If eye irritation persists: Get medical advice / attention.

Special marking:

EUH066 Repeated exposure may cause skin dryness or cracking.

Keep out of the reach of children!